Campbell Garmin 16-HVS Especificações descarregar pdf (Página 5)

GPS16X-HVS GPS Receiver

FIGURE 1. The GPS16X-HVS terminates in pigtails for direct

connection to our dataloggers.

1. Overview

The GPS16X-HVS is a complete GPS receiver manufactured by Garmin

International, Inc. Campbell Scientific configures the GPS16X-HVS to work

with our dataloggers and modifies its cable so that the cable terminates in

pigtails. The pigtails connect directly to the control ports of all dataloggers.

The CR1000, CR3000, CR800, and CR850 dataloggers use the GPS and serial

instructions to read, parse and store GPS data. Although wiring and

programming are more complicated, the CR23X, CR5000, and CR9000(X)

dataloggers can be used with the GPS16X-HVS. The CR10(X), CR500,

CR510, and CR200(X)-series dataloggers are not compatible with the

GPS16X-HVS. Information regarding the CR23X, CR5000, and CR9000(X)

dataloggers is included in Appendix B and C.

The GPS16X-HVS includes the GPS receiver and antenna in the same housing

with one cable for the power supply and communications. The GPS antenna

must have a clear view of the sky. Generally the GPS antenna will not work

indoors.

The GPS16X-HVS is a 12-channel GPS receiver that supports FAA Wide

Area Augmentation System (WAAS) or RTCM differential GPS. Also

supported is the 1 Pulse Per Second (PPS) timing signal. The cable

connections provided with the GPS16X-HVS do not support differential GPS

correction. The cable can be modified by the user if differential correction is

required.

To use newer PPS functionality, the datalogger needs to have a

newer clock chip. Dataloggers with newer chips are: CR1000M

Modules with serial numbers ≥ 20409; CR800/CR850s with

serial numbers ≥ 7920; CR3000s with serial numbers ≥ 3168.

NOTE

1 2 3 4 5 6 7 8 9 10 ... 35 36

Sem comentários

Campbell Garmin 16-HVS Especificações Página 5