Campbell CNR4 Manual de Instruções descarregar pdf (Página 13)

CNR4 Net Radiometer

2. Attach the 26120 mounting bracket to the vertical mounting pipe, or

CM200-series crossarm using the provided U-bolt (see FIGURE 4-2). If

mounted to a vertical pipe, ensure that the pipe does not cast a reflection

on the sensor. This includes both the incoming and outgoing sections of

the sensor.

FIGURE 4-2. Attaching the CNR4 onto the mounting rod (pn 26120)

using vertical pole or horizontal crossarm

3. Insert the sensor’s support arm into the mounting block of the mounting

bracket kit. Make sure the sensor points in the direction of the arrows that

appear after the word SENSOR on top of the bracket (see FIGURE 4-2).

Do not attempt to rotate the instrument using the sensor

heads, or you may damage the sensors; use the mounting

rod only.

4. Perform a coarse leveling of the sensor using the sensor’s bubble level.

CAUTION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Sem comentários

Campbell CNR4 Manual de Instruções Página 13