Campbell CC5MPX Manual de Instruções descarregar pdf (Página 70)

CC5MPX Digital Camera

Additionally, the PakBus neighbouring address allows for communication with

devices that are several hops away on the PakBus network. See TABLE 7-11 for

reference.

Table 7-10 PakBus Communication Settings

Variable

Allowable

Values

Description

-232 BAUD Rate

* 115200

* 57600

* 38400

* 19200

* 9600

Select the desired BAUD rate. Once the BAUD rate is set, it will

always be fixed. The factory Default

Settings is 115200 BAUD.

-485 BAUD Rate

* 115200

* 57600

* 38400

* 19200

* 9600

Select the desired BAUD rate. Once the BAUD rate is set, it will

always be fixed. The factory Default Settings is 115200 BAUD.

PakBus Port

Read Only

The value reflects the internal jumper settings of the camera. It will

either read RS

-232 or RS-

485. See Section 8 Internal Jumpers, if the

jumpers need to be changed.

PakBus Address

1 to 4094

The desired PakBus address for this camera. The factory default is

55.

PakBus Destination

Address

1 to 4094

The PakBus address of the device the camera will communicate with

or send files to.

PakBus Neighbour

Address

0 to 4094

Enter the address of the PakBus device physically to connect to the

CC5MPX PakBus communication lines. This allows the neighbor to

relay communication between the CC5MPX and the final destination

for the data.

PakBus Communication

Delay

0 to 16

Extra delays may be required for certain communication links, such

as satellite.

PakBus

Security Code

0 to 65535

The factory default is 0. If a security code is not required by the

PakBus destination device, set this parameter to 0. Otherwise set the

security code as required by the destination service.

7.9 Still Images

Selecting the Still Image settings tab brings up the Still Image settings page (see

Figure 7-35). The Still Image settings allows for the configuration of still images

that the camera will take/

There are 2 Sub Tabs that include 2 independent Still Settings:

x Still Settings #1

x Still Settings #2

Table 7-12 Still Image Settings describes the variables used in the Still Image

settings.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 116 117

Comentários a estes Manuais

Sem comentários

Campbell CC5MPX Manual de Instruções Página 70

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Campbell CC5MPX