Campbell RAWS-P Manual descarregar pdf (Página 10)

RAWS-P Remote Automated Weather Station

2. Getting Started

Set up and test your station before field deployment.

NOTE

Keep this manual and the CR1000KD Keyboard Display

with the RAWS. Review the station siting and orientation

section before field deployment. If a problem is encountered,

review the equipment wiring and troubleshooting sections in this

manual.

NOTE

After siting and leveling the RAWS station, open the enclosure and

(1) connect the battery cable and (2) verify the CH100 switch is in

the ‘on’ position. When this equipment is not in use (i.e.,

transport or storage), disconnect battery cable to the CH100.

NOTE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Sem comentários

Campbell RAWS-P Manual Página 10