Campbell COM310 Manual do Utilizador descarregar pdf (Página 2)

Required Equipment

• Phone. Typically a touch-tone phone, but a

rotary phone can be used to receive a verbal

report only when the report does not require

user participation (i.e., pressing numbers to

select information).

• Analog phone line. Some DBX office phone

lines are digital and cannot be used with

analog modems such as the COM310.

• Surge protector at the datalogger site if one

is not installed by the phone company. CSI

offers model 6362 (mounts inside enclosure)

or model 4330 (similar to the 6362 but with-

out enclosure mounts).

• COM310 voice-synthesizer modem

(includes SC12 cable and LoggerTalk™

vocabulary software)

• CR800, CR510, CR10(X), CR1000, or CR3000

datalogger. The CR10 requires a UV EPROM.

• Environmental enclosure (typically an

ENC12/14, ENC14/16, or ENC16/18).

• Power supply**

Datalogger-to-computer communication also

requires at the computer site an IBM-PC or compatible computer with our LoggerNet Datalogger Support

Software, an SC25PS or equivalent modem cable, and a user-supplied Hayes-compatible modem.

Specifications

Baud rate: 1200, 9600 bps

Typical current drain: 100 µA quiescent

180 mA active (voice transmitting)

Operating voltage: 12 Vdc

Operating temperature range: -25° to +50°C standard, -55° to +80°C, optional

Dimensions: 5.2" x 1.7" x 3.6" (13.1 x 4.3 x 9.2 cm)

Weight: 0.75 lbs (0.34 kg)

FCC Compliance: Equipment complies with FCC Rules Part 68 and requirements in

Part 15 of FCC Rules for Class A computing devices.

FCC Registration No.: B9QUSA-31402-MM-T

Standards: Bell 212A, CCITT V.21, V.32bis compatible

** For information on analyzing your system's power requirements, please request a copy of Campbell Scientific's Power

Supply brochure or application note.

A COM310 connected to a CR1000 datalogger, SC12 cable, and

a surge protector.

1 2 3 4

Sem comentários

Campbell COM310 Manual do Utilizador Página 2