Campbell AVW200 series Manual de Instruções Página 30

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 114
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 29
AVW200-series 2-Channel Vibrating Wire Spectrum Analyzer Modules
FIGURE 4-2. Ground Lug and Power Connectors on the AVW200
4.3 Datalogger Wiring (Direct Connection)
There are three options for connecting the AVW200 directly to the datalogger
(see TABLE 4-1); the cable is ordered as a common accessory.
TABLE 4-1. Datalogger to AVW200 Cable Options
Communication
Protocol Cable Used
Datalogger Port for Cable Attachment AVW200
Port for
Cable
Attachment
CR800,
CR850
CR1000,
CR3000
CR5000 CR10X CR23X
PakBus (direct
RS-232
connection)
18663 Null
Modem Cable
RS-232 RS-232 N/A N/A N/A RS-232
PakBus (direct
RS-232
connection)
17855 or
SC110’s DTE
Cable (pigtail to
DB9; see
TABLE 4-2)
Control
port pair
(C1/C2
or
C3/C4)
Control
port pair
(C1/C2,
C3/C4,
C5/C6, or
C7/C8)
N/A N/A N/A RS-232
SDI-12 CABLE3CBL-L
Cable
C1 or
C3
and G
C1, C3,
C5,
or C7
and G
SDI12
and
G
C1
through
C8 and
G
C5
through
C8 and
G
C1 and G
Connects to a power source via
19246 power cable
Connects to earth ground via an 8 AWG wire
when
not directly connected to a datalogger
Indicates AVW200 is
connected to a power source
20
Vista de página 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 113 114

Comentários a estes Manuais

Sem comentários