Campbell RF410 Manual de Instruções descarregar pdf (Página 36)

PakBus Networking Guide

FIGURE 16. Edlog PakBus Datalogger Setup

If you don’t want to change a category, check the “Do not change current

settings” box and when the program compiles in the datalogger, that area will

remain the way it was. Be sure to save/compile the program after making the

PakBus Settings changes before sending to the datalogger.

Notes

Zeroing a PakBus Settings “Communication Interval” will delete the selected

port when the program is compiled and sent to the datalogger.

To insert a row of PakBus Addresses (Address / Swath), place cursor over that

field, right-mouse click, and select “Insert Row.”

Configuring an existing port type will overwrite any previous settings for that

port.

4.1.2 *D PakBus Setup for the CR10X, CR510 and CR23X

You can use Edlog \ Options \ PakBus Settings to configure a dataloggers’s

PakBus settings or you can use a keyboard display to edit *D15, *D18 and

*D19 to accomplish the same thing. *D17 is for viewing a datalogger’s routing

table.

You can configure a datalogger’s PakBus settings anytime after downloading a

PakBus OS, before or after sending the program. The *D settings become part

of the program as soon as you press A. Pressing *0 saves the *D settings to

flash. Current PakBus settings will persist through a new program send if the

new program has no Edlog entered PakBus settings.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 123 124

Sem comentários

Campbell RF410 Manual de Instruções Página 36