Campbell RF410 Manual de Instruções descarregar pdf (Página 50)

PakBus Networking Guide

Result Codes:

1. –1001 Attempted setting is read only

2. –1002 Out of space in the remote

3. –1003 Syntax error

4. 0 Success

5. >1 Number of communication failures

6.1.9 P199 - Routing Table to Input Locations

Purpose:

Used for trouble-shooting; instruction stores the datalogger’s routing table in

Input Locations.

Example:

3: PakBus - Routing Table Information (P199)

1: 0011 First Loc [ ______________ ]

Three pieces of information are stored:

1 PakBus Address of the destination node

2 PakBus Address of the neighbor used to route to the destination node (this

line not present if destination is a neighbor)

3 Maximum response time metric (in seconds)

Set aside Input Locations equal to the maximum number of routes you expect to

see × 3 (node, neighbor, route metric) + 1 extra for the −1 terminator of the list.

For example, if you expect a maximum of 6 routes, then 6*3 + 1 = 19 Input

Locations.

6.1.10 P224 - Send Table Definitions

Purpose:

To transfer Table Definitions to LoggerNet under datalogger program control

as datagrams per BMP5 Message Type 0x89. Can be used for one way media

like Goes satellite. Other purposes pending.

Example:

P224: Send Table Definitions

01: 17 Local DL Port

02: 0003 PakBus Address; destination

03: 4 Table Number: 0 selects all final storage data tables

100 selects the current data table

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 123 124

Sem comentários

Campbell RF410 Manual de Instruções Página 50