Campbell RF410 Manual de Instruções descarregar pdf (Página 9)

PakBus Networking Guide

(LoggerNet

Server)

RF400 RF400

CR10XPB_1

CR205_2

CR205_3

ROUTER

Server uses

static route to

discover

CR10XPB_1

Router uses

neighbor filter

potential neighbor

settings to discover

CR205_2

CR205_3

For this Quick Start network example you will need the following items or the

equivalent:

1. Compatible PC with LoggerNet 2.1c or higher and PakCom software.

2. CR10XPB or CR510PB datalogger (with PakBus OS).

3. CR10KD keyboard display.

4. 2 CR205 (or CR210, CR215) dataloggers with antennas.

5. 2 RF400 (or RF410, RF415) Radios with antennas and antenna cables.

6. CSI # 15966 12 VDC wall adapter power supply for base RF400.

7. PS100 or equivalent 12V power supply for CR10XPB.

8. 2 CSI # 16869 sealed rechargeable batteries for CR205s.

9. Two 109-L temperature probes or two 22KΩ/10KΩ resistor sets to

simulate 109-Ls.

10. SC32B RS-232 to CS I/O interface.

Step 1 – Set Up Base RF400 Series Radio

a. Select an RF400 and label it “base”

b. Restore default settings as follows:

• Connect a serial cable from your PC’s COM port to the base RF400’s

RS-232 port.

• Run PakCom and configure it to your PC’s COM port (1 – 4).

• Connect RF400 to its 12 VDC power supply.

• Click on PakCom Radio Settings / OS Download tab and click on

Settings / OS.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 123 124

Sem comentários

Campbell RF410 Manual de Instruções Página 9